Skip to content
Common Ground Engineering PLLC

Services

Electrical engineering services

Common Ground Engineering PLLC provides four areas of electrical engineering service. Each is performed under the responsible charge of a licensed Professional Engineer.

01

Power system studies

Power system studies show how an electrical system behaves under fault conditions and what hazards workers face at each piece of equipment. Systems are modeled in SKM PowerTools, and studies can be updated as the system changes.

Short circuit analysis
Calculates the available fault current at each bus and equipment location, so equipment ratings and protective device sizing can be verified.
Protective device coordination
Sets breakers, fuses, and relays so the device nearest a fault clears it first, which limits the extent of an outage. Results include time-current curves and recommended settings.
Arc flash analysis
Calculates incident energy and arc flash boundaries at each equipment location in accordance with NFPA 70E, with equipment labels and PPE requirements.

02

Electrical inspection and condition assessment

On-site review of electrical equipment and installations. We document existing conditions, identify deficiencies and code issues, and recommend corrective work.

Where access is limited, inspections can include aerial observation of rooftop and elevated equipment by an FAA UAS remote pilot.

03

NEC code consulting

Code interpretation and compliance review for electrical designs and installations under the National Electrical Code and local amendments. We identify violations before construction or inspection and support coordination with the authority having jurisdiction.

Common topics include grounding and bonding (Article 250), motors (Article 430), transformers (Article 450), emergency systems (Article 700), and critical operations power systems (Article 708).

04

PE peer review

Independent review of electrical designs, calculations, and power system studies by a licensed Professional Engineer. Reviews check design adequacy, calculations, equipment selections, and code compliance, and note issues before construction begins.

Request a proposal

Describe the project, its location, and the scope of work. All services are performed under the responsible charge of a licensed Professional Engineer. Read our full Engineering Services Disclaimer.